Bostitch PT-2319-3M 3/4-Inch 23 Gauge Pin (3000 per Box)

Bostitch PT-2319-3M 3/4-Inch 23 Gauge Pin (3000 per Box) Review

Bostitch PT-2319-3M 3/4-Inch 23 Gauge Pin (3000 per Box) Feature

• Pack of 3/4-inch 23 gauge pins
• Coated finish protects against damage
• For use with the Bostitch HP118K and TU-216-2330 Headless Pinners
• Packaged in box of 3000
• For Use in the Bostitch HP118K and TU-216-2330 Headless Pinners

23 gauge headless micro pins fit all 23 gauge pin nailers. Nails leave no visable mark in the workpiece. 3000 nails. For use in the Bostitch model

Bostitch SX1838K 18-Gauge Narrow-Crown Stapler

Bostitch SX1838K 18-Gauge Narrow-Crown Stapler Review

Bostitch SX1838K 18-Gauge Narrow-Crown Stapler Feature

• Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
• Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spaces
• Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
• Swivel air fitting: increased maneuverability. Filtered air inlet for improved engine durability.
• Reversible belt hook: with integrated pencil sharpener for ultimate convenience

Drives 18 gauge finish staples from 1/2'' to 1 1/2''. Features: Oil free operation, selectable trigger system, low nail lockout, belt hook, ultra quiet rear exhaust, dial a depth control. Kit includes: Finish stapler, 1/4'' swivel fitting, 1000 1'' finish staples, carrying case, and belt hook. Uses SX5035 staples.

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer Review

Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer Feature

• 1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
• High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
• Constructed of aircraft-grade aluminum
• Includes rubber-tipped mallet
• 17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty

The Bostitch MIIIFN Pneumatic Flooring Cleat Nailer lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives nails into both unfinished and pre-finished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them.

The Bostitch Pneumatic Flooring Cleat Nailer At a Glance: 420 in./lbs. of driving power High-speed, mallet-actuated operation Extra-wide base plate for stability and control Ergonomic design with elongated handle

1.5" to 2.0" L-shaped cleats are ideal for installing hardwood flooring. View larger.

Adaptor foot and FloorGuard graphite mallet provide stability and control. View larger.

Interchangeable base plates help you drive cleats at the proper angle and depth. View larger.

All the Power You Need to Get Jobs Done Quickly
Harness the power of compressed air and complete your flooring jobs quickly and easily. Just connect the Bostitch MIIIFN Pneumatic Flooring Cleat Nailer to your air compressor for 420 in/lbs of impact at 70-120 PSI. A manual strike will activate the firing action with a lightweight FloorGuard graphite mallet, and a 110-cleat magazine will keep you working without interruption.

Comfortable Design Keeps You in Control
Ergonomically designed for ease of use, the MIIIFN features an elongated handle that lets you work in a natural, comfortable position. For control, the extra-wide 1/2- and 3/4-inch interchangeable base plates sit flush against floor boards for stability, so you can drive cleats at the proper angle and depth every time. Additionally, a pre-finished floorboard adapter foot won't scuff or scratch floors during installation for a professional-grade look.

Lightweight, Durable Construction for Everyday Use
The MIIIFN Pneumatic Flooring Cleat Nailer's lightweight body and graphite FloorGuard mallet make this tool comfortable enough to wield all day without fatigue. Built for durability, this nailer will withstand the wear and tear of any jobsite.

The Bostitch MIIFN Pneumatic Flooring Cleat Nailer measures 3.13 x 11.5 x 17.25 inches (WxHxL) and weighs 11.2 pounds. It is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Cleat nailer, FloorGuard graphite mallet, pre-finished-flooring adapter foot, and two base plates (1/2 inch and 3/4 inch).

Bostitch LHF2025K Engineered Hardwood Flooring Stapler

Bostitch LHF2025K Engineered Hardwood Flooring Stapler Review

Bostitch LHF2025K Engineered Hardwood Flooring Stapler Feature

• Adjustable precision knobs adjust for ¼-Inch to ½-Inch laminated flooring
• Over-molded rubber grip for comfort and maneuverability
• Muffled rear exhaust to direct air away from workspace
• Non-Marring trip tips so you don't accidentally damage the flooring
• Easy sight tongue engagement so you hit the pocket every time
• Antimicrobial Solid sie cast construction
• Built-in EZ Remover swings out for convenient staple removal
• Integrated StapleStore compartment keeps extra staples close at hand
• Soft rubber grip and base for comfort stapling
• Staples 2 to 25 sheets

For use with engineered hardwood and laminate flooring, the Bostitch LHF2025K 20-Gauge Engineered Hardwood Flooring Stapler features tool-free, adjustable knobs to match the size of your flooring material. Non-marring tips prevent accidental damage, and easy-sight tongue engagement helps you hit the pocket with every staple. And because it's designed for comfort, the Bostitch LHF2025K lets you work all day with minimum fatigue.

LHF2025K 20-Gauge Flooring Stapler At a Glance: Designed for use with engineered hardwood and laminate flooring Easy-sight tongue engagement for correct installation No-mar tips prevent floor scratches or damage Adjust between 1/4 inch and 1/2 inch Includes carrying case, no-mar tips, staples, and installation block Seven-year limited warranty

Overmolded rubber grip maximizes comfort and minimizes fatigue. View larger.

Adjustable knobs allow for tool-free adjustment. View larger.

Easy-Sight Tongue Guide, No-Mar Cap, and Oil-Free Operation
The Bostitch LHF2025K makes it easy for you to correctly install engineered and laminate flooring. An easy-sight tongue guide helps you accurately drive staples into the pocket--every time. Additionally, a non-marring cap ensures you won't scratch or mark your flooring material, and oil-free operation means you won't damage or stain your floor with accidental oil spills.

Designed for Comfort and Safety
At an easy-to-handle 2.9 pounds, the Bostitch LHF2025K can be used for long periods of time with minimum operator fatigue. The over-molded rubber grip offers increased comfort for all-day projects, and the quiet rear exhaust prevents blowback in your face. Additionally, a swivel air fitting keeps the stapler right where you want it, so you can move freely without getting tangled in the compressor hose.

Easily Adjusts to Your Flooring Size
Designed to work with almost any flooring size, the Bostitch LHF2025K features adjustable knobs for fastening flooring of varying thicknesses. Adjust between 1/4 inch and 1/2 inch for engineered hardwood and laminate flooring applications.

Tool Specifications
The Bostitch LHF2025K takes 20-gauge, 1-inch staples. A magazine capacity of 125 staples keeps you in operation for longer periods of time--and reloading is fast and easy. A real workhorse, this stapler has a driving power of 122 inch/pounds.

The Bostitch LHF2025K is backed by a manufacturer's seven-year limited warranty.

What's in the Box
Bostitch LHF2025K 20-Gauge Engineered Hardwood Flooring Stapler, carrying case, two spare no-mar tips, 1,000 staples, and installation block.

A combination of modern style, precision performance and features make the B777 Business Pro stapler ideally suited for any high volume office or home user. Featuring die cast construction for superior quality and performance, it will easily and consistently staple up to 25 sheets. This Antimicrobial protected stapler also features a built in staple remover that swings out for convenient staple removal. It's integrated StapleStore compartment located at the bottom of the stapler keeps extra staples close at hand when needed. The soft rubber grip and base make stapling even more comfortable and will also stand vertically or horizontally for ultimate convenience. Our innovative no jam technology eliminates frustrating staple jams. For added convenience, it can be effortlessly opened for bulletin board tacking. This stapler uses standard staples. Bostitch SBS191/4CP Amazon ASIN B00006IFMP. Lifetime Warranty

Bostitch 51-853 16oz Steel Hammer Rip Claw

Bostitch 51-853 16oz Steel Hammer Rip Claw Review

Bostitch 51-853 16oz Steel Hammer Rip Claw Feature

• 75 percent larger strike face for improved striking accuracy (patent pending)
• Patented AntiVibe technology minimizes vibration and shock at impact
• Patented torsion control stabilizers reduce arm-twisting fatigue
• Magnetic nail start feature for extended reach for one-handed nailing
• Smooth face hammer

75% larger strike face for improved striking accuracy (patent pending). Patented AntiVibe technology minimizes vibration and shock at impact. Patented torsion control stabilizers reduce arm twisting fatigue. Magnetic nail start feature for extended reach for 1 handed nailing. Exclusive rim temper reduces incidences of chipping or spalling. Forged, 1 piece steel construction for increased strength and durability. Slip resistant handle for a secure grip and added comfort. Precision balanced.

Bostitch S16D131-FH 28 Degree 3-1/2-Inch by .131-Inch Wire Weld Framing Nails (2,000 per Box)

Bostitch S16D131-FH 28 Degree 3-1/2-Inch by .131-Inch Wire Weld Framing Nails (2,000 per Box) Review

Bostitch S16D131-FH 28 Degree 3-1/2-Inch by .131-Inch Wire Weld Framing Nails (2,000 per Box) Feature

• Full Roundhead 3-1/2" x .131" 28 Degree Wire Collated Framing Nail
• Coated finish eases penetration resistance and increases holding power.
• Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
• 2,000 per Box
• Works in: F28WW, N88WWB, N79WW, N80SB

2,000 Count, 3-1/2" x .131, Smooth Shank, 28 Degree, Wire Weld, Full Head Stick Framing Nail, Fits Bostitch Model #F28WW, True Value #632556 & Other Bostitch Models N80SB & N88WW.

Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer

Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer Review

Factory-Reconditioned Bostitch U/SB-2IN1 2-In-1 Narrow Crown Stapler/18-Gauge Brad Nailer Feature

• Reconditioned Bostitch Products have a One-year warranty through the Bostitch factory or an authorized service center
• 5/8- to 1-5/8 18-gauge brad nailer and ½- to 1-1/2-inch 18 crown staple combo tool
• Adjustable depth dial; tool-free directional exhaust; 135 in./lbs. driving power
• Nail lock-out feature eliminates dry firing; magazine holds 100 nails

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes Brad Nailer / Finish Stapler Combo - U/SB-2IN1, Carrying Case

Stanley Bostitch HFM-3 45-Ounce Graphite Flooring Mallet

Stanley Bostitch HFM-3 45-Ounce Graphite Flooring Mallet Review

Stanley Bostitch HFM-3 45-Ounce Graphite Flooring Mallet Feature

• Beveled face to set boards and protect wear layer
• Soft replaceable face to protect flooring and tool
• Jacketed graphite handle adds strength and durability while providing the feel of the wood
• Flared comfort grip handle ensures firm grip and minimizes slippage
• Length: 14.8-Inch

Includes 45 oz. Graphite Hardwood Flooring Mallet - HFM-3

Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Magnesium Housing

Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Magnesium Housing Review

Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Magnesium Housing Feature

• 1-1/4-inch to 2-1/2-inch coil siding nailer with 500-pounds of driving power
• Drives wire weld and plastic collated coil nails; tool-free depth adjustment; directional exhaust
• Lightweight, durable magnesium housing
• Includes nailer and carrying case
• 4.4-pounds; 1-year warranty

Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a magnesium housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

The Bostitch N66C-1 Coil Siding Nailer At a Glance: 515 in./lbs. of driving power Adjustable nail depth Lightweight, durable magnesium housing Tool-free adjustable exhaust

All-day siding jobs are easier on your hands thanks to lightweight magnesium housing. View larger.

Accepts both wire-weld and plastic-inserted coil nails from 1.25" to 2.5". View larger.

Works with a Variety of Siding Materials, from Soft Wood to Steel
Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem.

The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load.

The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working.

Lightweight, Durable Construction for Everyday Use
Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with magnesium, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. The N66C-1 stores in its included protective carrying case when not in use.

The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Siding nailer and carrying case.

Bostitch BT1350B 2-Inch 18-Gauge Brad Nails, 2000-Per Box

Bostitch BT1350B 2-Inch 18-Gauge Brad Nails, 2000-Per Box Review

Bostitch BT1350B 2-Inch 18-Gauge Brad Nails, 2000-Per Box Feature

• 2-Inch length
• Chisel point
• Coated finish
• 2000 Brads per box
• For use in the Bostitch BT200K-2 industrial brad nailer

STANLEY BOSTITCH BRAD NAILS *18 gauge *Straight finish brad *Painted heads *For use in Bostitch BT-50 brad nailer *Brown *2000 per box *2" Length

Factory-Reconditioned Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit

Factory-Reconditioned Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit Review

Factory-Reconditioned Bostitch U/CPACK1850BN 18-Gauge Brad Nailer and Compressor Combo Kit Feature

• CAP2000P-OF 2.0 HP (peak) oil-free compressor
• SB-1850BN 2-inch 18GA brad nailer
• 1/4-inch by 25-foot PVC air hose with fittings
• Brad nailer features adjustable depth guide, tool-free adjustable exhaust and no-mar tip, drives 18-gauge brads from 5/8-Inch to 2-Inch in length
• Compressor offers 2.8-cfm at 90-psi with 150 max, large 6-gallon reserve tank, impact-resistant shroud protects gauges

The Bostitch CPACK1850BNR Factory Reconditioned CPACK1850BN 2-inch Brad Nailer and Compressor Combo Kit is a great entryway into pneumatic tools. With the Bostitch SB-1850BN Factory Reconditioned 2-Inch brad nailer and the CAP2000P-OF Factory Reconditioned oil-free compressor you are getting the perfect combo kit for all of your around-the-house projects. In addition to the tool and compressor, you also receive a tool lubricant and carrying case. with the CPACK1850BN there isn't a project that you can't tackle. Features: Oil-free pump requires less maintenance 2.8-CFM @ 90-PSI with 150 max. operating pressure for improved tool performance Large 6-gallon reserve tank with ball-type drain valve for easy drainage Impact-resistant composite shroud protects gauges against jobsite damage Adjustable depth guide sets nails to desired depths quickly and conveniently Tool-free adjustable exhaust conveniently directs exhaust away from the user No-mar tip protects work surface Recoil-style air hose included (shown with regular air hose NOT included) What's In The Box: CAP2000P-OFR 2.0 HP (Peak) Oil-Free Compressor SB-1850BNR 2-inch 18 GA Brad Nailer 1/4-inch x 25-foot PVC Recoil-Style Air Hose With Fittings Tool Lubricant Carrying Case

Bostitch BCS1516 15-1/2 Gauge 2-Inch Hardwood Flooring Staple, 7720 per Box

Bostitch BCS1516 15-1/2 Gauge 2-Inch Hardwood Flooring Staple, 7720 per Box Review

Bostitch BCS1516 15-1/2 Gauge 2-Inch Hardwood Flooring Staple, 7720 per Box Feature

• 2-Inch Length
• 1/2-Inch Crown Width
• Coated Finish
• 7728 Staples Per Box
• For Use in the Bostitch MIIIFS Industrial Flooring Stapler

For use in Bostitch pneumatic stapler MIIIFS. 1/2" crown. 15-1/2-gauge.